bs-logo
EN
NL
Contact

B&S Wheelchair Winch

effortlessly pull a wheelchair in the car

The B&S Winch is an aid to pull a wheelchair with occupant into wheelchair accessible vehicles (WAV’s), like a lowered floor car or a minivan with sloping ramp. When getting out of the vehicle via the ramp, the B&S Winch holds the wheelchair, so it comes out in a controlled manner without constantly having to give backpressure.

The B&S Wheelchair Winch is stylish, compact and fits perfectly into the interior of any car. The operator is always supplied with remote control.

DOWNLOAD

Wheelchair Winch with belt (200 kg)

B&S Winch with belt, dimensions: 230x200x140 mm. The pulling capacity of the winch is 200 kg (angle of approx.14°).
The B&S Winch with belt is equipped with:

  • radio remote control
  • additional emergency switch integrated in the cover
  • current limiter, the B&S Winch is protected against overload
  • Soft-Start function; a variable speed control
  • 5 meter winch belt with a belt buckle at the end. The required accessory to attach to the wheelchair can be attached to this belt buckle.

All parts of the winch are concealed under the cover. This makes assembly relatively easy. Mount the winch in the WAV or bus, connect it to the battery and the winch is ready for use.

Wheelchair Winch with rope (200 kg)

A modified version of the winch is equipped with a cord instead of a belt. This version is specially designed, and particularly suitable for use in WAV’s in which is little space for a winch. The flexibility of the cord makes it possible to place the winch under the driver’s or passenger’s seat.

All dimensions and functionalities are the same as the Wheelchair Winch with belt.

Wheelchair Winch XS (125 kg)

Specially for WAV’s with limited loading space, B&S developed the B&S Wheelchair Winch XS. A smaller version (dimensions 195x150x105 mm) of the standard winch. The pulling capacity of the Winch XS is 125 kg (angle of approx.14°). The B&S Wheelchair Winch XS is equipped with:

  • radio remote control
  • additional emergency switch integrated in the cover
  • automatic overload protection fuse integrated in the cover
  • 3.5 meter winch belt in combination with a hook or elastic V-yoke to attach to the wheelchair frame

All parts of the Winch XS are concealed under the cover. This makes assembly relatively easy. Mount the winch in the WAV or bus, connect it to the battery and the winch is ready for use.

The Wheelchair Winch XS is also available the modified version with the cord instead of the belt, identical to the 200 kg winch. The flexibility of the cord makes it possible to place the winch under the driver’s or passenger’s seat.

Wheelchair Winch XL (350 kg)

In addition to the B&S Wheelchair Winch XS, a heavy-duty version is now also available: the B&S Wheelchair Winch XL. The pulling capacity of the winch XL is 350 kg (angle of approx.14°).
The B&S Wheelchair Winch XL is equipped with:

  • radio remote control
  • additional emergency switch integrated in the cover
  • easily accessible automatic fuse to protect against overload
  • 7 meter winch belt with a belt buckle at the end. The required accessory to attach to the wheelchair can be attached to this belt buckle.

All parts of the Winch XL are concealed under the cover. This makes assembly relatively easy. Mount the winch in the WAV or bus, connect it to the battery and the winch is ready for use.

The B&S Wheelchair Winch XL is particularly suitable for use in larger wheelchair buses and ambulance transport.

Accessories to attach to the wheelchair

Various accessories are available to attach the winch to the wheelchair frame. The winch is equipped with a belt buckle, in which the following accessories can be attached.

B&S Winch-Lock

The B&S Winch-Lock is a special version of the B&S Wheelchair Winch, which can be integrated into a 4-point wheelchair tie-down system with 2 electric lockable retractors in front (mostly used in WAV’s). This way, the features of both systems are combined with each other in a synergetic way.

The principle is that the retractors are not connected directly to the battery, but they are powered directly by the Winch-Lock. This means that the retractors can only be unlocked when the Winch-Lock is operated. Due too the fact that noting is changed on the installation of the tie-down system, it still complies to the ISO 10452 standard.

B&S Winch-Lock is universal and easily integrated with the familiar locking systems as Q-straint, Unwin, Dahl, AMF, Quick-Secure and Handi-Secure.